Honda Civic -2017 2021-1.5L Turbo (Ex & SI) | 08150-HDC6-D| Clutch Kit
Description
When upgrading the 1.5L Turbo engine in the 10th Gen Honda Civics, the stock
clutch and flywheel leaves a lot to be desired. Quite quickly the stock clutch
becomes incapable of supporting power upgrades and more aggressive driving on
a race track. Clutch Masters offers a complete lineup of single and twin disc,
as well as single mass aluminum and steel flywheels to suit your cars current
and future needs.
This dampened disc MUST be used with a single mass flywheel and is not
compatible with the OEM dual mass flywheel.
FX400 clutch kits have a 170% increase in holding capacity over factory
clutch. This means the FX400 will hold 170% more horsepower and torque over
your stock clutch.
The FX400 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate
with a custom and extremely durable, Sprung Ceramic disc. This is the ultimate
extreme duty street and/or road/drag racing system. It is available in a 6 or
8 ceramic puck configurations. The 6-puck being the more aggressive setup and
8-puck being the less aggressive. The sprung hub design allows for moderate
dampening in high-torque applications, rendering it much more street friendly
than solid or rigid designs. This disc is designed for long life, outstanding
holding capacity, and rapid heat dissipation.
The FX400/HDCL (8-puck) ceramic full face disc design creates a quick and
rapid engagement and maintains minimal chatter due to the marcel cushion
between the disc linings. This disc is designed for street driven vehicles.
The FX400/HDC6 (6-Puck) ceramic paddle design creates a quick and rapid
engagement as well as clutch chatter that may not be ideal for street driven
vehicles. Warning Due to the solid (no Marcel) friction rivet design, the
FX400 6 disc engages very quickly and may chatter slightly in first and
reverse. To help alleviate this problem, we only use premium ceramic friction
material.
Heavy-Duty 4 or 6 puck or Segmented 8 Puck Ceramic Button Disc
Premium Ceramic Friction Material
Heavy-Duty Sprung Hub
No Marcel
OEM or better Release Bearing
Pilot Bearing
Alignment Tool
Instruction Card
Decals
Ceramic based clutch disc are not intended to increase the life expectancy of a clutch but rather to increase the holding capacity and improve the durability of the clutch. Using a ceramic based material for easy street driving may reduce the life of the clutch kit due to harsh engagement and higher tendency to slip the clutch kit. Ceramic disc are never recommended for stock or near stock vehicle applications.
Product Disclaimer:
Emissions Equipment Tampering Warning: In many states, tampering with your vehicle’s emissions equipment is unlawful. Our products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway.
Using our products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state-by-state details in the USA).
CARB-Restricted Areas: CARB-Restricted products, will not be shipped to state of California under any circumstatences.
Official Air Resource Board Link: ARB State Adoption Link
Customer Responsibility: It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using, or installing any of our products.
By proceeding with the purchase and use of our products, customers affirm their commitment to adhere to the terms outlined in this comprehensive product disclaimer. We reserve the right to update this disclaimer as necessary.
