VW/AUDI 1.8L 20V transverse T3 twin scroll turbo manifold + 252 / 260 performance camshaft set + 2.50mm decompression MLS head gasket
- The TMA05 manifold is a GGG40 cast manifold, with a T3 turbocharger Flange; manifold accepts 2-bolt 38mm wastegates.
- 8 spacer washers are included for easier assembly of the top nuts.
- The application is VW / Audi 1.8 20V transverse engines. (Golf, A3)
- Will not fit AWD applications.
- These SPA Turbo Cams for your VW are one of the best overall performance upgrades you can do.
- Not a peaky or hard to live with pair, this matched camshaft set increases performance throughout the available rev range and is a popular application for the street performance or dual street track uses cars.
- Intake 252°/Exhaust 260°
- Includes Adjustable cam sprocket/s
- This is a popular combination, designed to run with OEM standard lifters and springs
- Fits VW 1.8T 20V applications
- More torque and Horsepower!
- Intake 252°, cam lift 8,2, valve lift at TDC 0,8 - for TURBO, for hydr. lifters
- Exhaust 260°, cam lift 10,4, valve lift at TDC 0,7, for hydr. lifters
- Attention: we strongly recommend the assembly with NEW hydraulic lifters, otherwise camshafts can be damaged.
- ( Mfg / Vehicle (model) / Year / Engine )
Golf/GTI IV 2001-up 1.8T
Golf/GTI IV 2000 1.8T
Jetta IV 2000 1.8T
Jetta IV 2001-up 1.8T
New Beetle 2000 1.8T
New Beetle 2001-up 1.8T
- Tech Tips:
- Professional installation is a must with this cam set
- Timing chain tensioner needs to be slightly modified to allow free travel of the included Adjustable cam sprocket.
- Install it with a new set of lifters
VW 1.8L 20v 0.098" 2.50mm decompression MLS head gasket
- NEW Compression reduction VW 1.8L 20v.
- Special cylinder head gasket for turbo conversion on the 1.8L 20V.
- With this special Turbo multilayer metal cylinder head gasket.
- The compression reduction is already integrated in the seal.
- (Ground and coated).
- Will accept pistons up to 82.50mm overbored sized, can be used with smaller bores with no problem too.
- Total thickness: 2.50mm (0.098")
- The new compression ratio: (depending on the engine variant, see the overview below).
- Attention only for 1,8T with performance increase or planned cylinder head to the compensation!
- This overview shows how the engine changes the compression ratios.You save yourself the purchase of 2 cylinder head gaskets and an intermediate plate!
- Metal seals are characterized by a very long service life!
- Comparable with OE numbers Comparable to manufacturer numbers
- 1.8T with basic compression rate 9.5: 1.
- (z.B. AGU, AJH, APH, APP, AQJ,AQX, ARX, ARY, ARZ, AUG, AUQ, AUM, AVC, AWC, AWD, AWW, AYP, BBU, BEK, BFV, BE, BJX, BVP, VER, AEB, AJL, APH, APU, AVJ, AWT, BEX, BFB usw...
- With our gasket compression rate will be 8.55:1
- 1.8T with basic compression rate 9: 1
- (z.B. AMK, AMU, APX, APY, BAM)
- With our gasket compression rate will be 8.15:1
- Comparable with OE numbers Comparable to manufacturer numbers
- VW: 058103383K
- VW: 058103383M
- VW: 06A103338F
- VW: 06B103383B
- Elring: 366.670
Product Disclaimer:
Emissions Equipment Tampering Warning: In many states, tampering with your vehicle’s emissions equipment is unlawful. Our products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway.
Using our products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state-by-state details in the USA).
CARB-Restricted Areas: CARB-Restricted products, will not be shipped to state of California under any circumstatences.
Official Air Resource Board Link: ARB State Adoption Link
Customer Responsibility: It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using, or installing any of our products.
By proceeding with the purchase and use of our products, customers affirm their commitment to adhere to the terms outlined in this comprehensive product disclaimer. We reserve the right to update this disclaimer as necessary.
